Filter
Top Products
4 Press .
5 Press or repeatedly until Save Photos appears.
6 Press .
7 If needed, press or repeatedly until the setting you want appears.
Notes:
• If photos on the memory card were taken on more than one date, selections will include Last Date and
Date Range.
• To choose a date range, press and then or repeatedly until the desired date is displayed. Date ranges
are displayed by month and year starting with the most recent month.
8 Press Start Color or Start Black.
Note: If there is not enough memory on the flash drive, a prompt appears on the display.
Related topics:
• “Connecting photo storage devices” on page 67
Working with photos using the control panel
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For
best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24
hours before stacking, displaying, or storing.
Printing all photos
1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side,
see the instructions that came with the paper.) For more information, see “Loading paper” on page 6.
2 Insert a memory card or flash drive that contains the images you want to print. For more information, see “Inserting
a memory card” on page 67 or “Inserting a flash drive” on page 68.
3 Press or repeatedly until Print Photos appears.
4 Press .
5 Press or repeatedly until Print All Photos appears.
6 Press Start Color or Start Black.
The print settings used on the print job are displayed sequentially on the second line of the display.
7 Press Start Color or Start Black again.
Related topics:
• “Using the control panel” on page 88
Working with photos
70