Lexmark 642e MFP All in One Printer User Manual


 
101
Attendance messages
Remove paper from
standard output bin
The standard output bin is full of print
media.
Remove the stack of print media from the bin to
clear the message and resume printing.
Touch Continue to make the MFP recheck the
output level in the standard output bin.
Replace all originals if
restarting job.
One or more messages which
interrupted a scan job are now
cleared. Replace the original
documents in the scanner to
restart the scan job.
The MFP receives a scan job;
however, there is no original
document in the ADF. Place the
original documents in the scanner
to restart the scan job.
Job level recovery is active.
Touch Cancel Job if a scan job is processing
when the attendance message appears. This
cancels the job and clears the message.
Touch Scan from Automatic Document Feeder
if the page jam recovery is active. Scanning
resumes from the ADF immediately after the
last successfully scanned page.
Touch Scan from flatbed if page jam recovery is
active. Scanning resumes from the flatbed
immediately after the last successfully scanned
page.
Touch Finish job without further scanning if
page jam recovery is active. The job ends at the
last successfully scanned page, but the job is
not canceled. Successfully scanned pages go
to their destination: copy, fax, e-mail, or FTP.
Touch Restart job if job recovery is active and
the job is restartable. The message clears. A
new scan job containing the same parameters
as the previous job starts.
Replace jammed originals
if restarting job.
The MFP receives a scan job;
however, there is no original
document in the ADF.
Page level recovery is active.
Replace wiper The MFP detects that the fuser wiper
needs replacing.
1 Replace the fuser wiper.
2 Touch Continue to clear the message.
Touch Ignore to clear the message, but at the
next power-on, the message appears again.
Scan Document Too Long The scan job exceeds the maximum
number of pages.
Note: The scanner finishes scanning current
pages in the ADF, but data is lost when the job
cancels itself after reaching the maximum
number of pages.
Touch Cancel Job to clear the message if the
job is restartable.
Scanner ADF Cover Open The scanner automatic document
feed cover is open.
The message clears when the cover is closed.
Scanner Jam Access Cover
Open
The scanner jam access cover is
open.
Close the cover to clear the message.
Scanner registration
successfully completed
Scanner registration is successful. Touch Continue to clear the message.
Unsupported USB device,
please remove
A device is inserted in the front USB
port, but it is not recognized.
Remove the unsupported USB device to
continue.
Unsupported USB hub,
please remove
A USB hub is inserted in the front
USB, but it is not recognized.
Remove the unsupported USB hub to continue.
1565 Emulation error,
load emulation option
The download emulator contained in
the firmware card does not function
with the MFP firmware.
Note: The MFP automatically clears
the message in 30 seconds and then
disables the download emulator on
the firmware card.
Download the correct download emulator
version from the Lexmark Web site.
30.yy Invalid refill,
change cartridge
The MFP detects a refilled Lexmark
Cartridge Return Program print
cartridge.
Install a new print cartridge to clear the
message.
Message Meaning Action