Filter
Top Products
Settings
69
Using MFP menus
Print Settings
Print settings consist of the following menus. Click any of the menus for more information:
Finishing Menu
Use these menu items to set the user default settings for all jobs. Printing from an application may override user default
settings.
Background
Removal
Adjusts the amount of background
visible on a copy.
-4 to +4 (0*) -4 sets Background Removal to off.
+4 sets Background Removal to the
maximum allowed.
Contrast Specifies the contrast used for the
scan job. The default is dependent
on the Content menu item. If the
Content menu item is reset from the
default setting, then the default for
Contrast is reset, also.
0–5
Best for content*
Best for content has a default value, also,
since the value is dependent on the
Content menu item. For more information,
see Content. If Content is mono text, the
Contrast default value is 5. The default is 0
for items other than mono text.
Any reset of the Content value resets the
default of the Best for content value.
Shadow Detail Adjusts the amount of shadow
detail visible on a copy.
-4 to +4 (0*) -4 preserves the least amount of shadow
detail.
+4 preserves the most shadow detail.
Scan edge to
edge
Specifies if the original document is
scanned edge-to-edge prior to
sending the scan job.
Off*
On
Finishing Menu PCL Emulation Menu
Quality Menu PDF Menu
Utilities Menu HTML Menu
Setup Menu Image Menu
PostScript Menu
Menu item Purpose Values and descriptions
Duplex Sets duplex (two-sided) printing as
the default for all print jobs.
Note: This menu item appears if an
optional duplex unit is installed.
Off* Prints on one side of the print media.
On Prints on both sides of the print media.
Menu item Purpose Values and descriptions