Filter
Top Products
95
Fax status messages
Fax status messages
Cancel jobs messages
Password and PIN messages
Message Meaning
Answering The MFP is answering a fax call.
Call complete A fax call is completed.
Connect <x>bps The fax is connected. <x> is the baud rate per second.
Dialing A fax number is dialed. If the number is too long to fit on the screen,
only the word Dialing appears.
Fax failed The fax failed to send.
Job stored for delayed transmission. The scanning completes for a delayed send fax job.
Line busy A fax number is dialed, but the fax line is busy.
No answer A fax number is dialed, but no connection is made.
No dial tone The MFP does not have a dial tone.
Receive complete The MFP has received an entire fax job.
Receiving page [n] The MFP receives page [n] of the fax job, where n is the number of the
page received.
Sending page [n] The MFP sends page [n] of the fax job, where n is the number of the
page sent.
Set clock The Real Time Clock is not set. This message appears if no other fax
status message appears. It remains until the clock is set.
Set the clock.
Waiting for redial The MFP is waiting to redial the fax number.
Message Meaning
Deleting selected job(s) The Delete button is touched after jobs have been selected.
Job cannot be deleted A job in the job list is touched, but it cannot be canceled.
No jobs selected The Delete button is touched when no jobs are selected.
Message Meaning Action
Invalid or incorrect password. An incorrect password is entered. Touch Continue to return to the screen to
enter a correct password.
Invalid PIN. An incorrect Personal
Identification Number (PIN) is
entered.
Touch Continue to return to the screen to
enter a correct PIN.