Filter
Top Products
Settings
81
Using MFP menus
Security
These menu items are used to set security levels on individual print jobs requiring a PIN and securing setup.
Scaling Scales the image to fit the print
media size.
Anchor Top Left
Best Fit*
Anchor Center
Fit Height / Width
Fit Height
Fit Width
Note: When the Auto Fit setting is set
to On, Scaling is automatically set to
Best Fit.
Orientation Sets the image orientation. Portrait*
Landscape
Rev Portrait
Rev Landscape
Portrait—Prints text and graphics
parallel to the short edge of the paper.
Landscape—Prints text and graphics
parallel to the long edge of the paper.
Reverse Portrait—Prints the portrait
image rotated 180 degrees.
Reverse Landscape—Prints the
landscape image rotated 180 degrees.
For more information about short and
long edges, see Duplex Bind on
page 70.
Menu item Purpose Values and descriptions
Authentication
Method
Authentication disabled*
Internal
NTLM
Kerberos 5
LDAP
LDAP + GSSAPI
If Authentication disabled is selected,
Function Access settings requiring
user IDs or passwords are ignored.
For more information, see Function
Access.
Note: For LDAP and LDAP +
GSSAPI, use the MFP Embedded
Web Server (EWS) interface.
Auto 'Log out' delay Sets a delay in seconds at
the home screen before
an authenticated user is
automatically logged off.
1–60 (3*)
Scan to PC Port
Range
This menu item is used by
the system support
person who has a port-
blocking firewall between
the MFP and their users.
text entry Valid text entries are two sets of
numerical values separated by a
colon.
The default is an empty text entry field.
Menu item Purpose Values and descriptions