Filter
Top Products
Network/Ports
28
Using MFP menus
Network/Ports
TCP/IP
This menu item is used to view and change the Transmission Control Protocol/Internet Protocol settings. Internet Protocol
(IP) specifies the format of packets, also called datagrams, and the addressing scheme. Most networks combine IP with a
higher-level protocol called Transmission Control Protocol (TCP). TCP enables two hosts to establish a connection and
exchange streams of data. TCP guarantees delivery of data and also guarantees that packets are delivered in the same
order in which they were sent.
Menu item Purpose Values and descriptions
Set Hostname
Address Defines a specific address on the
network, which defines the device.
IP address 4 field IP address
Display only
Netmask Defines information that the network
uses to decide how to search for the
specific IP address.
netmask 4 field mask
Display only
Gateway Provides the address of the
machine that controls the
communication for the sub-network.
gateway 4 field IP address
Display only
Set static IP address link Link to the page to set a static IP
address. Changing the IP address
sets DHCP, BOOTP, and RARP to Off.
Enable DHCP DHCP is Dynamic Host
Configuration Protocol. The network
automatically assigns a number for
the network information.
On*
Off
Enable RARP RARP is Reverse Address
Resolution Protocol.
On*
Off
Enable BOOTP BOOTP is Bootstrap Protocol. On*
Off
AutoIP Provides an automatic IP. On*
Off
Enable FTP/TFTP Allows files to be transferred to the
device.
File Transfer Protocol (FTP) is the
protocol used on the Internet for
exchanging files. FTP uses the
Internet TCP/IP protocols to enable
data transfer.
TFTP is Trivial File Transfer
Protocol, which is a simple form of
FTP.
On*
Off
HTTP Server Enabled Specifies if Web pages can be seen.
HyperText Transfer Protocol (HTTP)
is the underlying protocol used by
the World Wide Web (WWW). HTTP
defines how messages are
formatted and transmitted, and what
actions Web servers and browsers
should take in response to various
commands.
On* The function is enabled. Web pages
can be seen.
Off The function is disabled.