Filter
Top Products
Paper Menu
25
Using MFP menus
Paper Loading
These menu items are used to set the loading orientation for each print media type. A source is loaded with preprinted print
media, and then the MFP can be notified that the print media is loaded for duplex (two-sided) printing. Use the application
software to indicate simplex (one-sided) printing. When simplex printing is selected, the MFP automatically inserts blank
pages to print the simplex job correctly.
Paper Loading is only shown on the LCD if a duplex unit is installed.
Custom Types
This menu item is used to define a name for each custom paper type. Assign names using a utility such as MarkVision or
from the LCD.
Custom Names
This menu item is used to define a custom name for each type of print media.
Menu item Purpose Values and descriptions
Card Stock Load Properly handles the specific
preprinted print media whether the
job is a duplex job (two-sided) or a
simplex job (single-sided).
Duplex
Off*
Duplex is for two-sided printing on
the print media, and off indicates that
duplex printing is turned off.
Labels Loading
Bond Loading
Letterhead Loading
Preprinted Loading
Colored Loading
Vinyl Labels
Loading
Duplex
Off*
Shown if vinyl labels are supported
in the specified source.
Custom <x>
Loading
Properly handles preprinted custom
paper whether the job is a duplex job
(two-sided) or a simplex job
(single-sided). (x represents 1–6.)
Duplex
Off*
Shown if the custom type is
supported in the specified source.
Menu item Purpose Values and descriptions
Custom Type <x> Specifies the type of print media
associated with each Custom Type
available in the Paper Type menu.
Paper*
Card Stock
Transparency
Labels
Vinyl Labels
Envelope
The custom type print media must
be supported in the designated
source in order to assign a user-
defined name.
Once the name is assigned, the
name appears instead of Custom
Type <x>.
Menu item Purpose Values and descriptions
<user-defined
Custom Name>
Specifies the name of print media
associated with each Custom Name
<x> available in the Paper Type menu,
where x is 1–6.
[user-defined
name], such as:
Stephen’s labels
Mary’s card stock
The custom print media loaded in
the designated source must be a
supported media type in order for a
user-defined name to be assigned.