Filter
Top Products
Settings
46
Using MFP menus
Printer Language Specifies the default printer
language used to
communicate data from the
computer to the MFP.
Note: This menu item is not
available from the LCD. It is
only available on the MFP
Embedded Web
Server.Setting a printer
language as the default does
not prevent a software
application from sending print
jobs that use the other
language.
PCL Emulation*
PS Emulation
PCL emulation—Uses a PCL interpreter for
incoming host communications.
PostScript emulation—Uses a PS interpreter
for incoming host communications.
Print Area Modifies the logical and
physical printable area.
Note: This menu item is not
available from the LCD. It is
only available on the MFP
Embedded Web Server.
Normal*
Fit to Page
Whole Page
Note: The Whole Page setting only affects
pages printed using PCL 5 interpreter. This
setting has no effect on pages printed using
the PCL XL or PostScript interpreters. If
attempting to print any data in the non-
printable area defined by Normal Print Area,
the MFP clips the image at the boundary
defined by the Normal defined printable area.
Download Target Specifies the storage location
for downloaded resources.
Storing downloaded
resources in flash memory is
permanent storage rather
than the temporary storage
that RAM provides. The
resources remain in the flash
memory even when the MFP
is turned off.
Note: This menu item is not
available from the LCD. It is
only available on the MFP
Embedded Web Server.
RAM* All downloaded resources are automatically
stored in printer memory (RAM).
Flash All downloaded resources are automatically
stored in flash memory.
Note: Flash appears as a menu item if a
formatted, nondefective optional flash
memory card which is not Write or Read/Write
password protected is installed.
Resource Save Specifies what the MFP does
with downloaded resources,
such as fonts and macros
stored in RAM, if the MFP
receives a job that requires
more memory than is
available.
Note: This menu item is not
available from the LCD. It is
only available on the MFP
Embedded Web Server.
Off* The MFP retains downloaded resources only
until memory is needed. It then deletes those
resources associated with the inactive printer
language.
On The MFP retains all downloaded resources for
all printer languages during language
changes and MFP resets. If the MFP runs out
of memory, 38 Memory Full appears.
Banner Page Specifies if the print job
should be printed as a
Banner Page.
Note: This menu item is not
available from the LCD. It is
only available on the MFP
Embedded Web Server.
Off*
On
To set to Off, clear the check box.
To set to On, select the check box.
Menu item Purpose Values and descriptions