Filter
Top Products
Paper Menu
22
Using MFP menus
Configure MP
This menu item is used to configure the multipurpose feeder as another source or manual feeder. If the multipurpose feeder
is linked with another tray, the MFP can select print media from the multipurpose feeder before selecting print media from
another tray.
Envelope Enhance
Use this setting to disable the optional envelope conditioner hardware when printing envelopes. This hardware significantly
lessens the wrinkling or creasing of some envelopes.
Note: When printing envelopes a bubble may form between the envelope layers. When the bubble reaches
the end of the envelope during the fusing process, a wrinkle or crease forms. To prevent this situation,
pressure on a roller in the fuser is released periodically. This is envelope conditioning.
Menu item Purpose Values and descriptions
Configure MP Determines when the MFP selects
print media loaded in the multipurpose
feeder.
Cassette* The MFP treats the multipurpose
feeder like any other tray. If a print
job requests a size or type that is
only loaded in the multipurpose
feeder, the MFP pulls print media
from the multipurpose feeder for
the job.
Manual The MFP treats the multipurpose
feeder like a manual feed tray, and
Load Manual appears when a
single sheet of print media needs to
be inserted in the feeder.
First The MFP pulls print media from the
multipurpose feeder until it is
empty, regardless of the source or
size requested for the job.
Menu item Purpose Values and descriptions
Envelope Enhance Disables the optional envelope
conditioner hardware.
On*
Off
This menu item is shown if optional
envelope conditioner hardware is
installed.
Turning Envelope Enhance to Off does
not allow the fuser to release pressure
during fusing.