Filter
Top Products
Settings
76
Using MFP menus
PostScript Menu
Use these menu items to change printer settings that affect jobs using the PostScript printer language. Printing from an
application may override user default settings.
PCL Emulation Menu
Use these menu items to change printer settings that affect jobs using the PCL emulation printer language. Printing from an
application may override user default settings.
Menu item Purpose Values and descriptions
Print PS Error Prints a page defining the
PostScript emulation error when an
error occurs.
Off* Discards the print job without
printing an error message.
On Prints an error message
before it discards the job.
Font Priority Establishes the font search order.
Note: Font Priority only appears
when a formatted flash is installed,
is neither defective nor Read/Write
or Write protected, and Job Buffer
Size is not set to 100%.
Resident* The MFP searches printer
memory for the requested font
before searching the flash
memory.
Flash/Disk The MFP searches the flash
memory for the requested font
before searching the printer
memory.
Menu item Purpose Values and descriptions
Font Source Determines the set of fonts shown in
the Font Name menu item.
Resident* Shows all fonts resident in printer
RAM when the MFP ships from the
factory.
Flash Shows all fonts stored in flash
memory.
Download Shows all fonts downloaded to
printer RAM.
All Shows all fonts available to the MFP
from all sources.
Font Name Identifies a specific font from the
specified font source.
R0 Courier* The font name and font ID for all
fonts in the selected font source are
shown. The font source abbreviation
is R for resident, F for flash, and D for
download.
Symbol Set Determines the symbol set for a
specified font name.
10U PC-8 (US)*
(country/region-
specific factory default
values)
A symbol set is a set of alphabetic
and numeric characters, punctuation,
and special symbols used when
printing with a selected font. Only the
symbol sets supported for the
selected font name are shown.
12U PC-850 (non-US)*
(country/region-
specific factory default
values)