Filter
Top Products
38
4
Paper and specialty media
specifications
The following table lists supported paper and specialty media sizes and types for the standard and optional
trays, as well as for the multipurpose feeder. We recommend that you try a limited sample of any paper or
specialty media you are considering using with the printer before purchasing large quantities.
For more details about the types of paper and specialty media your printer supports, refer to the Card
Stock & Label Guide available on our Lexmark Web site at www.lexmark.com.
Source Paper sizes supported Paper types supported Capacity
500-sheet trays Letter, A4, A5, Legal,
Executive, JIS B5, Folio
1
,
Statement
1
, Universal
2,3
Paper, transparencies,
labels, card stock
• 500 sheets of 20 lb paper
• 350 transparencies
5
• 200 sheets of labels or card stock
4,5
2000-sheet tray Letter, A4, A5, Legal,
Executive, JIS B5
Paper 2000 sheets of 20 lb paper
Multipurpose
feeder
Letter, A4, A5, Legal,
Executive, JIS B5, Folio
1
,
Statement
1
, Universal
2,3
Paper, transparencies,
labels, card stock
• 100 sheets of 20 lb paper
• 75 transparencies
5
• 40 sheets of labels or card stock
4,5
7¾, 9, 10, DL, C5, B5, other
6
Envelopes 10 envelopes
1
Supported as selected paper with tray size sensing turned off in the appropriate trays.
2
When selected, the page is formatted for 215.9 x 355.6 mm (8.5 x 14 in.) unless otherwise specified.
3
Load narrow media with the length in the feed direction (portrait).
4
If you print large quantities of labels or other glossy print media, have your fuser housing replaced with a web oiler
field upgrade kit.
5
Capacity varies with media weight and construction. The printer can print directly on transparencies designed for
use in laser printers. Print quality and durability depend on the transparency used. Always print samples on the
transparencies you are considering before buying large quantities.
For transparencies, the Paper Type setting should be set to Transparency to help prevent jams. (See Paper Type
for detailed information about this setting.) Check with the manufacturer or vendor to determine whether your
transparencies are compatible with laser printers that heat transparencies to 212°C (414°F). Use only
transparencies that are able to withstand these temperatures without melting, discoloring, offsetting, or releasing
hazardous emissions.
6
Size can vary from 98.4 x 62 mm to 176 x 250 mm (3.87 x 6.38 in. to 6.93 x 9.84 in.).