Filter
Top Products
94
After you have cleared the following areas, make sure all printer covers, doors, and trays are closed, and
then press Go to resume printing.
Note: The printer also displays <x> Pages Jammed. Be sure to remove all the jammed pages
before pressing
Go.
Area A
1 If you are using the multipurpose feeder,
release the levers on each side of the
feeder to lay it flat.
2 Press the pick assembly release lever and
remove all media and jams.
3 Return the feeder to its working position
and reload your media.
Area B
1 Open the left access door.
2 Pull down the lever until it stops.
3 Remove all visible media.
Note: Remove any torn media from
the printer.
4 Return the lever to its upright position.
5 Close the door.
Note: Open Tray 1 and make sure the
entire media stack is pushed all
the way down into the tray.