Filter
Top Products
52
NPA Mode
To specify whether the printer
performs the special processing
required for bidirectional
communication, following the
conventions defined in the Network
Printing Alliance (NPA) Protocol.
Note: Changing this menu item
automatically resets the printer.
Off Printer does not perform NPA
processing.
Auto* Printer examines the data to determine
the format and then processes it
appropriately.
PCL
SmartSwitch
To configure the printer so it
automatically switches to
PCL emulation when a print job
received through the network port
requires it, regardless of the default
printer language.
On* Printer examines data on the network
interface and selects PCL emulation if
the data indicates that is the required
printer language.
Off Printer does not examine the incoming
data. The printer uses PostScript
emulation to process the job if PS
SmartSwitch is On, or uses the default
printer language specified in the Setup
Menu if PS SmartSwitch is Off.
PS
SmartSwitch
To configure the printer so it
automatically switches to
PostScript emulation when a print job
received through the network port
requires it, regardless of the default
printer language.
On* Printer examines data on the network
interface connection and selects
PostScript emulation if the data
indicates that is the required printer
language.
Off Printer does not examine the incoming
data. The printer uses PCL emulation
to process the job if PCL SmartSwitch
is On, or uses the default printer
language specified in the Setup Menu
if PCL SmartSwitch is Off.
Std Net
Setup
To configure an internal print server. Values for this menu item are supplied by the specific
print server. Select the menu item to see the available
values.
Note: Refer to the documentation on the drivers CD for
more information.
Menu Item Purpose Values