Filter
Top Products
46
Finishing Menu
Use the Finishing Menu to define how the printer delivers the printed output.
Note: Values marked by an asterisk (*) are the factory default settings.
Toner
Darkness
To lighten or darken printed output, or
conserve toner.
Note: Setting Toner Darkness to values of
1, 2, or 3 is only effective when using the
PostScript driver.
5 If Print Mode is Black & White, a
setting of 5 increases toner
density and darkness to all print
jobs (PCL or PostScript). If Print
Mode is Color, a setting of 5 is the
same as 4.
4* Default toner darkness setting.
3 Reduction in toner consumption.
2 Further reduction in toner
consumption.
1 Maximum reduction in toner
consumption.
Menu Item Purpose Values
Blank Pages
To specify whether to include
application-generated blank pages as
part of your printed output.
Do Not Print* Does not print application-generated
blank pages as part of your job.
Print Prints application-generated blank
pages as part of your job.
Collation
To keep the pages of a print job
stacked in sequence when printing
multiple copies of the job.
Off* Prints each page of a job the number
of times specified by the Copies menu
item. For example, if you set Copies to
2 and send three pages to print, the
printer prints page 1, page 1, page 2,
page 2, page 3, page 3.
On Prints entire job the number of times
specified by the Copies menu item. For
example, if you set Copies to 2 and
send three pages to print, the printer
prints page 1, page 2, page 3, page 1,
page 2, page 3.
Copies
To set the number of copies you want
for the printer default value. (Set the
number of copies required for a
specific job from the printer driver.
Values selected from the printer driver
always override values selected from
the operator panel.)
1...999 (1*)
Duplex
To set duplexing as the default for all
print jobs. (Select Duplex from the
printer driver to duplex only specific
jobs.)
Off* Prints on one side of the paper.
On Prints on both sides of the paper.
Menu Item Purpose Values