Filter
Top Products
78
Disk Corrupted.
Reformat?
The printer has attempted a disk
recovery process and cannot repair
the disk.
•Press Go to reformat the disk and delete
all files currently stored on the disk.
•Press Stop to clear the message without
reformatting the disk. The printer may
display Disk Recovery and attempt to
recover the disk.
See also: Disk Recovery x/5 yyy%
Disk Recovery
x/5 yyy%
The printer is attempting to recover the
hard disk. Disk recovery takes place in
five phases; the second line on the
operator panel display shows the
percent complete of the current phase.
Wait for the message to clear.
Warning: Do not turn the printer off while
this message is displayed.
Empty Hole Punch
Box
The finisher hole punch waste box is
full.
Remove the finisher hole punch box, empty
it, and then replace it.
Enabling Menus
The printer is responding to a request
to make the menus available to all
users.
Wait for the message to clear, and then
press Menu to view the menus from the
operator panel.
See also: Enabling the menus
Engine Warming
The printer is preparing the fuser for
printing.
Wait for the message to clear.
Enter PIN:
=___
The printer is waiting for you to enter
your four-digit personal identification
number (PIN).
Use the operator panel buttons to enter the
PIN you identified in the driver when you
sent the confidential job to the printer.
See also: Holding a job in the printer
Fax <x>
The printer is processing an incoming
fax.
Wait for the message to clear.
Flushing Buffer
The printer is flushing corrupted print
data and discarding the current print
job.
Wait for the message to clear.
Formatting Disk
yyy%
The printer is formatting the hard disk.
When formatting takes longer than
usual, the second line of the display
shows the percent complete.
Wait for the message to clear.
Warning: Do not turn the printer off while
this message is displayed.
Formatting Flash
The printer is formatting the flash
memory.
Wait for the message to clear.
Warning: Do not turn the printer off while
this message is displayed.
Fuser Maint
The counter that tracks wear on the
fuser has reached its limit.
Replace the fuser.
Message What this message means What you can do