Filter
Top Products
80
Load Manual
<type> <size>
A request for a manual feed job has
been sent to the printer. The printer is
ready for insertion of a single sheet
into the manual feed slot.
• Load a sheet of the paper specified in
the second line of the display in the
manual feed tray or multipurpose feeder.
•Press Select or Go to ignore the manual
feed request and print on paper already
installed in one of the input sources. If
the printer finds a tray that has paper of
the correct type and size, it feeds paper
from that tray. If the printer cannot find a
tray with the correct paper type and size,
it prints on whatever paper is installed in
the default input source.
•Press Menu to open the Job Menu and
cancel the current job.
See also: Loading the multipurpose
feeder
Load <x> Plain Letter
Someone has initiated a tray
calibration procedure.
Load paper into <x> and press Go to
continue the calibration process.
Load Staples
The printer is trying to staple a print
job, but the stapler is empty.
• Install a new staple cartridge in the
stapler.
•Press Go to clear the message and
continue printing without stapling.
•Press Menu to open the Job Menu and
cancel the current job.
Load Tray <x>
The printer is trying to feed paper from
a source it detects is empty.
• Load paper of the size and type
requested in the second line of the
display in the specified tray. The printer
automatically clears the message and
continues printing the job.
•Press Menu to open the Job Menu and
cancel the current job.
See also: Loading the trays
Menus Disabled
The printer menus are disabled. You
cannot change the printer settings
from the operator panel.
You can still open the Job Menu to cancel a
job that is printing or to select a confidential
job or a held job that you want to print. If
you need access to the printer menus,
contact your network administrator.
See also: Disabling the operator panel
menus
Network Card Busy
An internal print server (also called an
internal network adapter or INA) is
being reset.
Wait for the message to clear.
Network <x>
A network interface is the active
communication link.
Wait for the message to clear.
Network <x>, <y>
A network interface is the active
communication link, where <x>
represents the active communication
link and <y> represents the channel.
Wait for the message to clear.
No DRAM Installed
No DRAM is installed in the printer. Turn the printer off, install DRAM and turn
the printer back on.
Message What this message means What you can do