Filter
Top Products
86
37 Insufficient
Collation Area
The printer memory (or hard disk, if
installed) does not have the free space
necessary to collate the print job.
•Press Go to print the portion of the job
already stored and begin collating the
rest of the job.
•Press Menu to open the Job Menu and
cancel the current job.
See also: Canceling a print job
37 Insufficient Defrag
Memory
The printer cannot defragment flash
memory, because the printer memory
used to store undeleted flash
resources is full.
• Delete fonts, macros, and other data in
printer memory.
• Install additional printer memory.
37 Insufficient
Memory
The printer memory is full and cannot
continue processing current print jobs.
•Press Go to clear the message and
continue the current print job. The printer
frees memory by deleting the oldest held
job and continues deleting held jobs until
there is enough printer memory to
process the job.
•Press Stop to clear the message without
deleting any held jobs. The current job
may not print correctly.
•Press Menu to open the Job Menu and
cancel the current job.
• To avoid this error in the future:
– Delete fonts, macros, and other data
in printer memory.
– Install additional printer memory.
Note: The messages 37
Insufficient Memory and Held
Jobs may be lost alternate on the
display.
See also: Holding a job in the printer;
Held Jobs May Be Lost; Held Jobs May
Not Be Restored
38 Memory Full
The printer is processing data, but the
memory used to store pages is full.
•Press Go to clear the message and
continue printing the job. The job may
not print correctly.
•Press Menu to open the Job Menu and
cancel the current job.
• To avoid this error in the future:
– Simplify the print job by reducing the
amount of text or graphics on a page
and deleting unnecessary
downloaded fonts or macros.
– Install additional printer memory.
See also: Canceling a print job
Message What this message means What you can do