Lexmark X642e Printer User Manual


 
134
Moving the MFP
Follow these guidelines to move the MFP within the office or to prepare the MFP for shipment.
Always use at least three people to lift the MFP.
Always turn off the MFP using the power switch.
Disconnect all cords and cables from the MFP before attempting to move the MFP.
Failure to repackage the MFP properly for shipment can result in damage to the MFP not
covered by the MFP warranty.
Damage to the MFP caused by improper moving is not covered by the MFP warranty.
Moving the MFP within the office
The MFP can be safely moved from one location within an office to another following these
precautions:
The MFP must remain in an upright position.
Any cart used to move the MFP should have a surface able to support the full footprint of the
MFP.
Severe jarring movements may cause damage to the MFP and must be avoided.
Preparing the MFP for shipment
To transport the MFP by vehicle or by commercial carrier, the MFP must be repackaged for shipment
using the proper packaging. The MFP package must be securely fastened to its pallet. Do not use a
shipping or transport method that requires the MFP to be shipped without a pallet. The MFP must
stay upright throughout the shipment. If you do not have all the original packaging, contact your local
service representative to order the repackaging kit. Additional instructions for repackaging the MFP
are provided in the repackaging kit.
CAUTION: Follow these guidelines to avoid injuring yourself or damaging
the MFP.