Filter
Top Products
85
4
Flex the sheets or envelopes back and forth to loosen them, then fan them. Do not fold or
crease the print media. Straighten the edges on a level surface.
Note: Hold transparencies by the edges, and avoid touching the print side. Fan the stack
of transparencies to prevent jams. Be careful not to scratch or leave fingerprints on
the transparencies.
5 Load the media in the tray.
Use the stack height label as a guide for stack height when loading print media.
Loading paper, transparencies, or envelopes
Note: Letterhead or other preprinted paper must be loaded differently depending on the
options you have installed.
• Load paper or transparencies with the left edge of the stack against the stack height label
and with the recommended print side facing up.
• Load envelopes flap side down with the stamp area and flap on the left. The end of the
envelope with the stamp area enters the multipurpose feeder first.
– Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-
stick adhesives. These envelopes may severely damage the MFP.
Note: Load only one size and type of print media at a time in the multipurpose feeder. Do
not mix sizes and types in the same tray.
Loading letterhead or preprinted paper
• Follow the illustrations for loading the paper according to your options.
Paper
Envelopes
Transparencies