Filter
Top Products
58
Fax setup
When you first turn on the MFP or if the MFP has been off for an extended time, Set clock will
appear. Additionally, many countries and regions require outgoing faxes to contain the following
information in a margin at the top or bottom of each transmitted page, or on the first page of the
transmission:
• Date and time (date and time fax is sent)
• Station name (identification of the business, other entity, or individual sending the message)
• Station number (telephone number of the sending fax machine, business, other entity, or
individual)
Note: See Electronic emission notices and Other telecommunications notices for
FCC information.
There are two methods to enter your fax setup information. They are:
• manually entering the information through the MFP control panel, or
• using your browser to access the MFP IP address and then entering the Configure menu.
Note: If you do not have a TCP/IP environment, you must use the MFP control panel to
set your basic fax information.
Select one of the following to find the instructions for the method you want to use.
Performing manual fax setup
1 Press Menu.
2 Touch Settings.
3 Touch Fax Settings.
4 Touch General Fax Settings.
5 Touch Station Name.
6 Enter the Station Name (enter your name or company name).
7 Touch Done to save your choice.
8 Touch Station Number.
9 Enter your fax phone number.
10 Touch Done.
Performing manual fax setup
Performing browser fax setup