Filter
Top Products
89
3
Slightly bend the stack of print media as shown, and place it on the elevator tray with the
preferred print side facing down. Align the stack of print media to the back of the drawer.
Note: For duplex printing, letterhead or other preprinted paper must be loaded differently.
Carefully align each stack as you load it to ensure a smooth edge where the stacks meet. Do
not load print media above the load line.
Note: When loading more than one ream of paper, we recommend you remove the top
and bottom sheet.
4 Close the loading door.
Floor-mounted configurations require additional furniture for stability. You must
use either a printer stand or printer base if using a 2000-sheet drawer. Certain
other configurations also must have a printer stand or printer base. More
information is available on our Lexmark Web site at www.lexmark.com/
multifunctionprinters.
Simplex (single sided)
Duplex