Filter
Top Products
Basic Copy Operations
4
Di152f/Di183f 4-19
To copy onto a custom paper size
Precautions for entering custom paper sizes:
✔ When entering a custom paper size,
be sure to specify the width and
length measurements correctly.
✔ When using the 10-Key Pad to enter
a custom paper size, the values are
entered in millimeters. The
conversion ratio is shown below.
1 inch = 25.4 mm
1
Load the document to be copied.
2
Load the paper into the Manual Bypass Tray.
3
Press the [No] key, and then use the and keys to select the type
of paper loaded.
4
Press the [Yes] key.
5
Press the key (“CUSTOM”).
6
Using the 10-Key Pad, enter the
length (mm) of the loaded paper.
❍ The paper length can be set
between 5-1/2 inch (140 mm)
and 17 inch (432 mm).
❍ If you wish to correct the entered setting, press the [No] key, and
then use the 10-Key Pad to enter the new number.
7
Press the [Yes] key.
Width (y)
Length (x)