Filter
Top Products
3
Before Making Copies or Faxing
3-40 Di152f/Di183f
Note:
● Load only copy paper of the specified type, size and amount,
otherwise paper misfeeds or other problems may occur.
● If paper with a size in metric (A4, A3, etc.) is loaded into a paper tray,
select the appropriate setting for the “INCH/METRIC” function in the
Utility mode. (p. 9-13)
● If paper with a non-standard size is loaded into the 1st Tray, select the
appropriate setting using the “TRAY1 PAPER” function in the Utility
mode. (p. 9-14)
● If paper with a non-standard size is loaded into the Manual Bypass
Tray or Multiple Bypass Tray, select paper size setting “CUSTOM”
before making copies, and then enter the corresponding paper size.
(p. 4-19)
● If cards, OHP transparencies, or postcards are loaded into the 1st
Tray, select the appropriate setting using the “TRAY1 PAPER”
function in the Utility mode. (p. 9-14)
● If cards, OHP transparencies, or postcards are loaded into the Manual
Bypass Tray or Multiple Bypass Tray, select the appropriate paper
type before making copies. (p. 4-15 or p. 4-17)
● If you do not want automatic paper size/paper source selection to be
activated when recycled paper is loaded into a paper tray, select the
appropriate setting using the “AUTO SELECT” function in the Utility
mode. (p. 9-16)
● If FLS paper with a size other than the default FLS size (8-1/4 × 13) is
loaded, the setting must be changed. For details, contact your service
representative.
● Do not load paper of different sizes into the same paper tray.