Filter
Top Products
Utility Mode – Fax Functions
10
Di152f/Di183f 10-35
10.2 Specifying Transmission Settings (“TX
OPERATION” Menu)
From the “TX OPERATION” menu, various functions for sending faxes
can be set.
“TX OPERATION” menu:
To select the “TX OPERATION” menu
1
Press the [Utility] key.
The first screen of the Utility mode
appears.
2
Press the key 7 times to select
“TX OPERATION”.
No. TX OPERATION Characteristic/Description
1 SCAN CONTRAST This function can be used to set the default scanning
contrast level to one of five settings between “LIGHT” and
“DARK”.
For dark-colored paper (media), select a setting towards
“LIGHT”. For faint or colored text, select a setting toward
“DARK”.
2 RESOLUTION This function can be used to set the default scanning
resolution (image quality) to one of the following: “Standard”,
“Fine”, “Super Fine”, “Half Tone + Standard”, “Half Tone +
Fine” or “Half Tone + Super Fine”.
• The manufacturer’s default setting is “Standard”.
3 DEFAULT TX This function can be used to set the default transmission
mode to “MEM.TX” or “ADF TX”.
• The manufacturer’s default setting is “MEM.TX”.
4 HEADER This function cannot be set on this machine. (Printing of the
name of the transmission source on the edge of the
document transmitted is fixed by the settings.)
5 OT-DIAL IN COPY This function can be used to specify whether or not faxing is
possible by pressing a one-touch dial key while the machine
is in Copy mode.
• The manufacturer’s default setting is “DISABLE”.