Filter
Top Products
13
Troubleshooting
13-2 Di152f/Di183f
There are streaks through the
copy.
There are specks throughout
the entire copy.
The Original Glass is dirty. Wipe the glass with a soft
dry cloth. (p. 14-9)
The document pad is dirty. Clean the document pad
with a soft cloth dampened
with a mild detergent.
(p. 14-9)
The original is highly
translucent, such as diazo
photosensitive paper or
OHP transparencies.
Place a blank sheet of
paper over the document.
(p. 4-6)
A double-sided document is
being copied.
If a thin double-sided
document is being copied,
the information on the back
side may be reproduced in
the copy. Use the Auto/
Photo key to select a
lighter density for the
background. (p. 4-26)
The edge of the copy is dirty. The document pad is dirty. Clean the document pad
with a soft cloth dampened
with a mild detergent.
(p. 14-9)
The selected paper size is
larger than the document
(with a zoom setting of
×
1.00).
Select a copy paper size
that is the same as the size
of the document. (p. 4-11)
Otherwise, select the “Auto
Size” function to enlarge the
copy to the selected paper
size. (p. 4-21)
The orientation of the
document is different from
the orientation of the copy
(with a zoom setting of
×
1.00).
Select a copy paper size
that is the same as the size
of the document.
Otherwise, select a copy
orientation that is the same
as the orientation of the
document.
The copy was reduced to a
size smaller than the copy
(with a reduced zoom ratio).
Select a zoom ratio that
adjusts the copy size to the
size of the selected paper.
(p. 4-22)
Otherwise, select the “Auto
Size” function to reduce the
copy to the selected paper
size. (p. 4-21)
Symptom Possible Cause Remedy