Filter
Top Products
10
Utility Mode – Fax Functions
10-4 Di152f/Di183f
To program a one-touch dial key
1
Select the “FAX REGISTRATION”
menu.
❍ Refer to “To select the “FAX
REGISTRATION” menu” on
page 10-2.
2
Press the [1] key from the 10-Key
Pad to select “ONE-TOUCH DIAL”.
3
Press the one-touch dial key that
you wish to program.
4
Using the 10-Key Pad, enter the fax
number of the recipient.
❍ The fax number can contain a
maximum of 30 digits.
For details on the characters
that can be entered, refer to p. 6-8.
❍ To enter a sub-address, continue with step 5.
❍ If a sub-address will not be entered, press the [Yes] key after
entering the fax number, and then skip to step 7.
❍ If “+” (one-touch dial key [22]) is added after the entered number,
the programmed number can be used with combination dialing
(p. 6-16).
❍ If you wish to change the fax number, press the [No] key, and then
enter the correct number.
❍ For details on F codes (sub-address and SID), refer to “Using F
codes” on page 7-25.