Filter
Top Products
Before Making Copies or Faxing
3
Di152f/Di183f 3-29
Turning On the Machine
After the machine is turned on, the indicator on the [Start] key lights up in
orange and “PLEASE WAIT!” appears in the display while the machine
warms up.
At this time, a document can be loaded into the Automatic Document
Feeder and the [Start] key pressed to queue the job. (p. 3-25)
Even though the [Start] key is pressed, the copy operation does not begin
until the machine has finished warming up (after about 30 seconds at a
room temperature of 73.4°F (23°C)).
Default Settings
The settings that are automatically selected when the machine is turned
off or the [Panel Reset] key is pressed are called the “default settings”.
These settings serve as a reference for all functions.
Copy mode
● Number of copies: 1
● Copy density: AUTO
● Zoom ratio: Full size (× 1.00)
● Paper source: AUTO (with the Automatic Document Feeder installed)
● Finishing function: Non-sort
Fax mode
● Resolution: Standard
● Contrast: Medium
● Transmission mode: Memory transmission
● Reception mode: Automatic reception
● Paper size/source priority: Priority to the paper size
● Transmission source: Within document
✎
Tip
The default settings can be customized using the functions in the
Utility mode (“9 Utility Mode – Copy Functions” and “10 Utility Mode –
Fax Functions”).