Filter
Top Products
6
Faxing
6-16 Di152f/Di183f
To fax using combination dialing
If one-touch dial keys or speed dial numbers have already been
programmed with special prefix numbers, a fax number can be specified
by recalling the prefix number from the one-touch dial key or speed dial
number, and combining it with the fax number of a recipient either entered
using the 10-Key Pad or recalled from a one-touch dial key or speed dial
number.
For example, if the phone number and the extension number of a recipient
are programmed in different one-touch dial keys, the fax number of the
recipient can be specified by combining the two numbers.
A maximum of 30 digits (excluding “+”) can be dialed.
For details on programming combination dialing numbers, refer to
page 10-3 and page 10-8.
1
Press the [Fax] key to enter Fax mode.
2
Load the document into the Automatic Document Feeder.
3
If necessary, change the “Resolution” setting (p. 6-8).
4
Press the one-touch dial key ([01]
through [27]) programmed with the
desired combination dialing
number.
or
Press the [Speed Dial] key, and
then use the 10-Key Pad to enter
the 3-digit speed dial number.
5
Use the 10-Key Pad to enter the
remainder of the fax number, and
then press the [Start] key.
❍ The remainder of the fax
number can also be specified
using the one-touch dial keys or
the speed dial numbers. If it is
specified using the one-touch
dial keys, the machine
automatically starts scanning the document and sending the fax.