Filter
Top Products
9
Utility Mode – Copy Functions
9-16 Di152f/Di183f
To set the “AUTO SELECT” function
1
Select the “PAPER SOURCE
SETUP” menu.
❍ Refer to “To select the “PAPER
SOURCE SETUP” menu” on
page 9-12.
2
Press the [3] key from the 10-Key
Pad to select “AUTO SELECT”.
3
Using the and keys, select a
paper tray, and then press the [Yes]
key.
4
Using the and keys, select
either “DISABLE” (does not allow
automatic paper selection) or
“ENABLE” (allows automatic paper
selection), and then press the [Yes]
key.
❍ If “DISABLE” was selected, a screen appears, allowing you to set
paper source switching.
❍ If “ENABLE” was selected, the “PAPER SOURCE SETUP” menu
appears again.
5
Using the and keys, select
either “FIXED” (does not allow
automatic paper source switching)
or “CONTINUOUS” (allows
automatic paper source switching),
and then press the [Yes] key.
The “PAPER SOURCE SETUP” menu appears again.