Filter
Top Products
Utility Mode – Fax Functions
10
Di152f/Di183f 10-7
5
Using the and keys, select
either “EDIT” or “DELETE”, and
then press the [Yes] key.
❍ If “EDIT” was selected, the fax
number is displayed. (Continue
with step 6.)
❍ If “DELETE” was selected, the settings programmed for the one-
touch dial key are deleted and the “FAX REGISTRATION” menu
appears again.
❍ If you try to change the settings for a one-touch dial number used
in group dialing or program dialing, a confirmation message
appears, asking whether or not to change the corresponding
settings programmed in group dialing or program dialing.
If the [Yes] key is pressed, the corresponding settings
programmed in group dialing or program dialing are changed.
If the [No] key is pressed, the corresponding settings programmed
in group dialing or program dialing are deleted.
❍ If a one-touch dial number used in group dialing or program dialing
is deleted, it is also deleted from the corresponding group dialing
or program dialing.
6
Change the fax number, F codes
(sub-address and SID) and modem
speed as desired.
❍ For details on changing the fax
number, refer to “Entering Text”
on page 3-36.
❍ For details on changing the F codes (sub-address and SID) or
modem speed, refer to p. 10-4.
7
When you are finished making changes, press the [Yes] key.
To change the settings of another one-touch dial key, repeat steps 3
through 7.
8
Press the [No] key to return to the
“FAX REGISTRATION” menu.