Filter
Top Products
Basic Copy Operations
4
Di152f/Di183f 4-11
4.3 Selecting the Paper Source
Before making a copy, the paper tray containing the paper that will be
used must be selected. Either the paper source is selected automatically
when the size of the document is detected, or the desired paper source
can be selected manually.
● Auto Paper:
If the “Auto Paper” function is selected, the paper tray containing the
most suitable size of paper is selected based on the size of the
document and the specified.
● Manual paper selection:
The paper tray containing the paper that you wish to use can be
selected.
✎
Note
The Automatic Document Feeder (optional) is needed for copying with
the “Auto Paper” function.
To make copies using the “Auto Paper” function
1
Load the document into the Automatic Document Feeder.
❍ Refer to “Loading the Document” on page 4-1.
2
Press the [Auto Paper/Auto Size]
key until the “Auto Paper” function is
selected.
❍ Check that “AUTO” appears in
the bottom line of the screen.
3
If necessary, specify any other copy settings.
❍ Zoom (p. 4-21)
❍ Copy density (p. 4-25)
4
Using the 10-Key Pad, enter the desired number of copies, and then
press the [Start] key.