Filter
Top Products
Utility Mode – Copy Functions
9
Di152f/Di183f 9-31
9.5 Specifying Copy Settings (“COPY SETTING 1” &
“COPY SETTING 2” Menus)
The settings that are automatically selected when the machine is turned
off or the [Panel Reset] key is pressed are called the “default settings”.
From the “COPY SETTING 1” menu, the default settings for various
functions can be specified.
“COPY SETTING 1” menu:
No. COPY SETTING 1 Description
1 PAPER PRIORITY This function can be used to specify the paper size or tray
that should be given priority when the “Auto” zoom setting is
selected.
• The manufacturer’s default setting is “Letter C”.
2 DENSITY PRIORITY This function can be used to set the density to “AUTO”,
“MANUAL” or “PHOTO” when the machine is turned off or
the [Panel Reset] key is pressed.
• The manufacturer’s default setting is “AUTO”.
3 DENSITY LEVEL(A) This function can be used to set the density level of the
“AUTO” density setting to one of the three settings between
“LIGHT” and “DARK”.
• The manufacturer’s default setting is the middle level.
4 DENSITY LEVEL(M) This function can be used to set the density level of the
manual density setting to one of the five settings between
“LIGHT” and “DARK”.
• The manufacturer’s default setting is the middle level.
5 BINDING POS. This function can be used to set whether the first page of a
book to be scanned is on the left (left-bound) or on the right
(right-bound).
• The manufacturer’s default setting is “LEFT”.
6 MARGIN SETTING This function can be used to specify between 0 inch and 3/
4 inch (20 mm), (in units of Approx. 1/16 inch (1 mm)) the
width of the binding area (margin) when copying documents
to be bound.
• The manufacturer’s default setting is 1/2 inch (10 mm).
7 ERASE SETTING This function can be used to specify between 1/4 inch (5 mm)
and 3/4 inch (20 mm), (in units of Approx. 1/16 inch (1 mm))
the width that is erased when making copies with the “Erase”
function set to “Left”, “Upper” and “Frame”.
• The manufacturer’s default setting for the “Left”, “Upper”
and “Frame” erase settings is 1/2 inch (10 mm).