Filter
Top Products
10
Utility Mode – Fax Functions
10-48 Di152f/Di183f
10.4 Specifying Communication Settings
(“COMM.SETTING” Menu)
From the “COMM.SETTING” menu, various functions are available for
specifying communication settings.
“COMM.SETTING” menu:
For details on setting the “TONE/PULSE” and “PSTN/PBX” functions,
refer to “Specifying the Phone Dialing System” on page 3-34 and
“Specifying the Phone Wiring System” on page 3-35.
No. COMM.SETTING Characteristic/Description
1 TONE/PULSE This function can be used to specify the dialing system. If this
function is not correctly set to the type of dialing system used,
faxes cannot be sent. Select the correct setting after
checking which type of dialing system is used by your
telephone line.
For details on setting this function, refer to “Specifying the
Phone Dialing System” on page 3-34.
2 LINE MONITOR This function can be used to set the volume when monitoring
communication to “HIGH”, “LOW” or “OFF”.
• The manufacturer’s default setting is “LOW”.
3 PSTN/PBX This function can be used to set whether the connected
telephone wiring is a public switched telephone network
(PSTN) or a private branch exchange (PBX).
For a PBX system, the outside line access number (or
extension number) must be specified.