Filter
Top Products
10
Utility Mode – Fax Functions
10-36 Di152f/Di183f
3
From the 10-Key Pad, press the key ([1] through [5]) for the “TX
OPERATION” function that you wish to set.
❍ The “TX OPERATION” functions are as follows:
1 SCAN CONTRAST
2 RESOLUTION
3 DEFAULT TX
4 HEADER
5 OT-DIAL IN COPY
✎
Tip
If, at any time, you wish to quit setting a “TX OPERATION” function,
press the [No] key. When the message “STOP SETTING?” appears,
press the [Yes] key to quit.
To specify the default scanning contrast (“SCAN CONTRAST”
function)
1
Select the “TX OPERATION” menu.
❍ Refer to “To select the “TX
OPERATION” menu” on
page 10-35.
2
Press the [1] key from the 10-Key
Pad to select “SCAN CONTRAST”.
3
Using the and keys, select
one of the five settings between
“LIGHT” and “DARK”, and then
press the [Yes] key.
The “TX OPERATION” menu
appears again.