Filter
Top Products
Utility Mode – Fax Functions
10
Di152f/Di183f 10-51
3
From the 10-Key Pad, press the key ([1] through [4]) for the
“REPORTING” function that you wish to set.
❍ The “REPORTING” functions are as follows:
1 ACTIVITY REPORT
2 RESERV.REPORT
3 TX RESULT REPORT
4 RX RESULT REPORT
✎
Tip
If, at any time, you wish to quit setting/changing a “REPORTING”
function, press the [No] key. When the message “STOP SETTING?”
appears, press the [Yes] key to quit.
To exit the “REPORTING” menu, press the [Panel Reset] key. The
main screen appears again.
To set the “ACTIVITY REPORT” function
1
Select the “REPORTING” menu.
❍ Refer to “To select the
“REPORTING” menu” on
page 10-50.
2
Press the [1] key from the 10-Key
Pad to select “ACTIVITY REPORT”.
3
Using the and keys, select
either “ON” or “OFF”, and then
press the [Yes] key.
The “REPORTING” menu appears
again.