Filter
Top Products
7
Fax Transmission/Reception Methods
7-2 Di152f/Di183f
✎
Tip
Even when pulse dialing is being used, entering “ ” produces signals
for tone dialing.
To send a fax manually
1
Load the document into the Automatic Document Feeder.
2
If necessary, change the “Resolution” setting (p. 6-8).
3
Pick up the telephone receiver.
❍
Check that the dial tone can be
heard.
4
Specify the fax number of the recipient.
❍
Use the telephone to dial the fax number.
❍
The fax number of the recipient can also specified using the keys
in the Control Panel of this machine (p. 6-10).
5
After finishing talking on the phone, the recipient should press the
necessary key to start receiving the fax.
Once the recipient’s fax machine is ready, a beep is sounded.
6
Press the [Start] key to begin
scanning and sending the fax.
7
Replace the telephone receiver.
❍
To stop the transmission, press the [Stop] key.
✎
Tip
If the [Speaker] key is pressed instead of picking up the telephone
receiver, the speaker can be used for manual transmission in the
same way as described above.