Filter
Top Products
3
Before Making Copies or Faxing
3-28 Di152f/Di183f
3.7 Power Switch and Default Settings
✎
Note
Do not turn off the machine while it is making copies or printing,
otherwise a paper misfeed may occur. Make sure that all copy/print
operations are finished before turning off the machine.
Do not turn off the machine while it is sending or receiving a fax,
otherwise a transmission error or paper misfeed may occur. Make
sure that all fax transmissions/receptions are finished before turning
off the machine.
✎
Note
When the machine is turned off, all settings except the stored copy
programs and Utility mode settings are reset to their defaults.
If the machine is not used for 15 min, it automatically enters Energy
Saver mode.
The length of time until the machine enters Energy Saver mode or
automatically shuts off can be specified using functions in the Utility
mode. For details, refer to “Specifying Machine Settings (“MACHINE
SETTING” Menu)” on page 9-2.
Turning the Machine On and Off
To turn on the machine
➜
Set the Power Switch to “|”.
To turn off the machine
➜
Set the Power Switch to “O”.