Filter
Top Products
Faxing
6
Di152f/Di183f 6-11
To fax by entering the fax number directly using the 10-Key Pad
1
Press the [Fax] key to enter Fax mode.
2
Load the document into the Automatic Document Feeder.
3
If necessary, change the “Resolution” setting (p. 6-8).
4
Using the 10-Key Pad, enter the fax
number of the recipient.
❍ F codes (sub-address and SID)
can also be entered. Refer to
“Using F codes” on page 7-25.
?
Have you entered the number correctly?
➜ The fax number can contain a maximum of 30 digits.
➜ The keys that can be used to enter the fax number are: the number
keys (0 through 9), , #, -, Space, and Pause
➜ If the [Redial/Pause] key is pressed while entering the fax number,
a 3-second pause is added. A pause appears as “P” in the display.
➜ If you wish to change the fax number, press the [No] key, and then
enter the correct number.
➜ If the machine is connected to a PBX line and the outside line
access number has been specified in the communication settings
(p. 3-35), enter “#” to dial the outside line access number
automatically.
5
Press the [Start] key to begin scanning and sending the fax.