Filter
Top Products
Chapter 4 Functions of ReplicationControl
153
y RV protection specified (-mode protect)
Performs Restore without reflecting the updated data of the MV into the RV. When Restore is
completed and the Synchronous State is placed, Separate is automatically executed and then the
state changes to Separated State.
y According to the default setting (-mode default)
On the Windows system, the system follows the MODE specification in the replication
operation option setting file. On the UNIX system, the system follows the setting of the
RPL_SEP_MODE environment variable. For details of each setting, refer to the “Data
Replication Command Reference”.
[Displayed Information]
The iSMrc_restore command displays messages when Restore starts, during execution, and when
Restore ends.
On the Windows system
[Start message]
iSM13224: MV is restored.
Volume name: volume_name
Mount Point: path
Umount Start YYYY/MM/DD hh:mm:ss
Umount Normal End YYYY/MM/DD hh:mm:ss
Restore Start YYYY/MM/DD hh:mm:ss
MV:disk_number ld_name type
volume_name
path
RV:disk_number ld_name type
volume_name
path
[Execution message]
Restoring...
[End message]
Restore Normal End YYYY/MM/DD hh:mm:ss
MV:disk_number ld_name type
volume_name
path
RV:disk_number ld_name type
volume_name
path