Filter
Top Products
Chapter 4 Functions of ReplicationControl
163
activity_state: Activity State of the paired volumes for which the wait command is
completed
Replicate: Synchronous State (rpl/sync)
Restore: Synchronous State (rst/sync)
Separate: Separated (including the Separated state accompanied
by completion of Restore(protect))
YYYY/MM/DD hh:mm:ss: Start/End time (Year Month Day Hour Minute Second)
disk_number: Physical disk number
ld_name: Logical disk name
type: OS type
volume_name: Mount point volume name
path: Drive letter or path name mounted on the NTFS volume folder
accessed by users
Waiting...: The “.” character is dynamically updated until Wait is completed.
On the UNIX system
[Execution message]
Waiting...
[End message]
activity_state Normal End YYYY/MM/DD hh:mm:ss
MV:disk_number ld_name type
RV:disk_number ld_name type
Description
If you do not want the execution message to appear, change the setting of the RPL_WAITMSG
environment variable. For information about environment variables, refer to the “Data
Replication Command Reference”.
activity_state: Activity State of the paired volumes for which the wait command is
completed
Replicate: Synchronous State (rpl/sync)
Restore: Synchronous State (rst/sync) or rst/sync (protect)
Separate: Separated
YYYY/MM/DD hh:mm:ss: Start/End time (Year Month Day Hour Minute Second)
special_file_name: Special file name
ld_name: Logical disk name
type: OS type
Waiting...: The “.” character is dynamically updated until Wait is completed.