Filter
Top Products
Chapter 3 Replication Management
37
(ii) LINK Disk Array Name
Indicates the identification name assigned to the linked disk array.
(iii) Path Number
Indicates the connection path number in the link.
If the link is connected via four paths, the path numbers are 0, 1, 2, and 3, respectively (refer to
Figure 3-5 “Replication Link Information”).
(iv) Path State
Display Description
Normal Indicates the normal status.
Offline Indicates that the link setting is unconfirmed during startup of the disk array.
Freeze Indicates that the Data Replication function in the target disk array is frozen.
Link Checking
Indicates that the link status is being checked due to a failure of communication
in the link. It transits to Normal or Fault after a certain time interval.
Fault Indicates that the link is invalid due to a failure of communication in the link.
(v) Director Number
Indicates the replication director number (host director for the S2400 and 2800 series) that the link
is set.