Filter
Top Products
Chapter 4 Functions of ReplicationControl
182
Description
YYYY/MM/DD hh:mm:ss: Start/End time (Year Month Day Hour Minute Second)
disk_number: Physical disk number
ld_name: Logical disk name
type: OS type
volume_name: Mount point volume name
path: Drive letter or path name mounted on the NTFS volume folder
accessed by users
[Execution Conditions]
To perform Flush, the following conditions must be satisfied.
(i) The target volume is registered in the volume list.
(ii) The target volume is in the Read/Write-available state.
(iii) Specifying a volume of a dynamic disk or a GPT-format partition disk is not allowed.
(iv) The specified file system is mounted.
(v) This command flushes only the Windows file systems so that the data of applications handling
their own cache cannot be flushed. To flush application data to the disk, you need to flush
application data first, and then execute the Flush command to flush the file system.