Filter
Top Products
Chapter 3 Replication Management
44
[Operation Procedure]
Pair Setting
Do one of the following to display the Pair Setting screen.
y Select a volume in the Replication Information screen, click [Operation] on the menu bar of the
Replication screen, and then select [Pair Setting].
y Right-click in the Replication Information screen, and then select [Pair Setting].
In pair setting, whether the selected volume can be set as MV is determined automatically. If the
selected volume is a volume for which pair setting cannot be performed as MV, the following prompt
appears.
Figure 3-8 Confirmation Screen
The possible causes are as follows:
Unexecutable condition Description
DDR/RDR
Due to the description of the reason, the volume cannot be set as MV of
DDR and RDR.
DDR
Due to the description of the reason, the volume cannot be set as MV of
DDR.
RDR
Due to the description of the reason, the volume cannot be set as MV of
RDR.
After checking the message, click the [Yes] button to display the Pair Setting screen. To select a
volume again on the Replication Information screen, click the [No] button.