Netopia 4000-Series Network Router User Manual


 
Virtual Private Networks (VPNs) 4-3
protocol over IP. ATMP is more efficient than PPTP for network-to-network tunnels.
IPsec stands for IP Security, a set of protocols that supports secure exchange of IP packets at the IP layer.
IPsec is deployed widely to implement Virtual Private Networks (VPNs). IPsec supports two encryption
modes: Transport and Tunnel. Transport mode encrypts only the data portion (payload) of each packet, but
leaves the header untouched. The more secure Tunnel mode encrypts both the header and the payload. On
the receiving side, an IPsec-compliant device decrypts each packet. The Netopia Firmware Version 5.4
supports the more secure Tunnel mode.
DES stands for Data Encryption Standard, a popular symmetric-key encryption method. DES uses a 56-bit
key. The Netopia Firmware Version 5.4 offers IPsec DES encryption over the VPN tunnel.
When used to initiate the tunnelled connection, the Router is called a PPTP Access Concentrator (PAC, in PPTP
language), or a foreign agent (in ATMP language). When used to answer the tunnelled connection, the Netopia
Router is called a PPTP Network Server (PNS, in PPTP language) or a home agent (in ATMP language).
In either case, the Netopia Router wraps, or encapsulates, information that one end of the tunnel exchanges
with the other, in a wrapper called General Routing Encapsulation (GRE), at one end of the tunnel, and unwraps,
or decapsulates, it at the other end.
Configuring the Netopia Router for use with the different protocols is done through the console-based menu
screens. Each type is described in its own section:
"About PPTP Tunnels" on page 4-4
"About IPsec Tunnels" on page 4-7
"About ATMP Tunnels" on page 4-8
Your configuration depends on which protocol you (and the router at the other end of your tunnel) will use, and
whether or not you will be using the VPN client software in a standalone remote connection.
Note: You must choose which protocol you will be using, since you cannot both export PPTP and use ATMP, or
vice versa, at the same time.
Having both an ATMP tunnel and a PPTP export is not possible because functions require GRE and the router’s
PPTP export/server does not distinguish the GRE packets it forwards. Since it processes all of them, ATMP
tunneling is impaired. For example, you cannot run an ATMP tunnel between two routers and also have PPTP
exported on one side.
Summary
A Virtual Private Network (VPN) connects the components of one network over another network. VPNs
accomplish this by allowing you to tunnel through the Internet or another public network in a manner that
provides the same security and features formerly available only in private networks.
VPNs allow networks to communicate across an IP network. Your local networks (connected to the Netopia
Router) can exchange data with remote networks that are also connected to a VPN-capable router.
This feature provides individuals at home, on the road, or in branch offices with a cost-effective and secure way
to access resources on remote LANs connected to the Internet with Netopia Routers. The feature is built
around three key technologies: PPTP, IPsec, and ATMP.