Filter
Top Products
Line Backup 7-7
Connection Profiles
The line backup feature allows you to configure a complete Connection Profile for the backup port, just as you
do for your primary WAN connection. In this way profiles are associated with a particular interface. The profile
should reflect the port it is associated with. It should have switched characteristics for the backup port.
For instructions on creating a Connection Profile see “Creating a New Connection Profile” on page 2-24.
To associate this Connection Profile with your backup port interface, choose Backup from the Interface Port
pop-up menu and press Return.
If you choose Backup, Telco Options becomes visible. The Telco Options screen allows you to set the
parameters for the modem connection.
Add Connection Profile
Profile Name: Profile 1
Profile Enabled: Yes
Data Link Encapsulation... PPTP
Data Link Options...
IP Enabled: Yes
IP Profile Parameters...
+----------------+
+----------------+
Interface Group... | Primary |
Telco Options... | Backup |
| Any Port |
+----------------+
COMMIT CANCEL
Return/Enter to discard changes you have made. Profile will not be added.
Configure a new Conn. Profile. Finished? ADD or CANCEL to exit.