Filter
Top Products
3-28 Firmware User Guide
The IP Profile Parameters screen, found under the WAN Configuration menu, Add/Change Connection Profile
screen, appears as shown.
If you select NAT Options, in either case, the NAT Options screen appears.
If you toggle IP Passthrough Enabled to Yes, additional field(s) appear.
IP Profile Parameters
Address Translation Enabled: Yes
IP Addressing... Numbered
NAT Map List... Easy-PAT List
NAT Server List... Easy-Servers
NAT Options...
Stateful Inspection Enabled: No
Local WAN IP Address: 0.0.0.0
Local WAN IP Mask: 0.0.0.0
Filter Set...
Remove Filter Set
RIP Profile Options...
Toggle to Yes if this is a single IP address ISP account.
Configure IP requirements for a remote network connection here.
NAT Options
IP Passthrough Enabled: No
Toggle ON to allow local WAN IP address to be used on LAN in addition to NAT.