Filter
Top Products
5-4 Firmware User Guide
For Key Management you can use either IKE or Manual. If you choose Manual, skip to “IPsec Manual Key
Entry” on page 5-19. If you choose IKE (the default) continue below.
■ Select IKE Phase 1 Profile and press Return.
■ A pop-up window displays a list of IKE Phase 1 Profiles that you have configured. If you have not previously
configured an IKE Phase 1 Profile, the selection ADD PH1 PROFILE allows you to do that now.
Adding an IKE Phase 1 Profile
IKE Phase 1 Profiles contain the information that the two ends of a tunnel use to authenticate each other and
the parameters that govern the public key cryptography exchanges that are required to generate new keys
periodically. Make sure to add an IKE Phase 1 Profile. If an IKE Phase 1 Profile is not assigned to an IKE
Connection Profile, all VPN traffic for that profile will be discarded.
Select ADD PH1 PROFILE. The Add IKE Phase 1 Profile screen appears.
+-IKE Phase1 Profile--+
+---------------------+
| <<ADD PH1 PROFILE>> |
| <<NONE>> |
Key Management... | |
IKE Phase 1 Profile| |
| |
Encapsulation... | |
| |
| |
| |
ESP Encryption Tran| |
ESP Authentication | |5-96
| |
Compression Type...| |
| |
| |
| |
Advanced IPsec Opti| |
| |
COMMIT +---------------------+
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.