Netopia 4000-Series Network Router User Manual


 
2-2 Firmware User Guide
ADSL Line Configuration screen
The ADSL Line Configuration screen is shown below:
1. Select Circuit Type and from the pop-up menu choose the type of circuit to which you will be connecting:
Multimode, T1.413, G.dmt/G.lite, or ADI.
2. Select Trellis Coding Enabled. Toggle it to On (the default) or Off.
3. Select Signaling Mode and choose Echo Cancellation or FDM (the default).
4. If you selected Multimode Circuit Type, the Fast Retrain Enabled field appears. Toggle it to On (the default)
or Off.
5. Select Data Link Encapsulation and press Return. The pop-up menu will offer you the choice of PPP or
RFC1483.
6. Press Escape to return to the WAN Configuration screen.
For multiple permanent virtual circuit (PVC) configurations, see “Multiple ATM Permanent Virtual Circuits” on
page 2-16.
ADSL Line Configuration
Circuit Type... Multimode
Trellis Coding Enabled: On
Signaling Mode... FDM
Fast Retrain Enabled: On
Data Link Encapsulation... RFC1483