Filter
Top Products
Introduction 1-3
reconfiguring the manner in which you may be using the router to connect to more than one service
provider or remote site. See “WAN Configuration,” beginning on page 2-1. See also Chapter 4, “Virtual
Private Networks (VPNs).”
■
The
System Configuration
menus display and permit changing:
See “System Configuration Screens,” beginning on page 2-35.
■
For IADs, the
Voice Configuration
menus provide the tools for configuring the voice telephone features
available in Netopia Firmware Version 5.4. See Chapter 8, “Voice Configuration.”
■
The
Utilities & Diagnostics
menus provide a selection of seven tools for monitoring and diagnosing the
router's behavior, as well as for updating the firmware and rebooting the system. See Chapter 11, “Utilities
and Diagnostics.”
■
The
Statistics & Logs
menus display nine sets of tables and device logs that show information about your
router, your network, and their history. See “Statistics & Logs,” beginning on page 9-4.
■
The
Quick Menus
screen is a shortcut entry point to the most commonly used configuration menus that
are accessed through the other menu entry points.
■
The
Quick View
menu displays at a glance current real-time operating information about your router. See
“Quick View Status Overview” on page 9-1.
Netopia Models
This
Firmware User Guide
covers all of the Netopia 4000-Series Router and IAD models. However some
information in this guide will only apply to a specific model.
Screen differences
Because different Netopia 4000-Series models offer many different features and interfaces, the options shown
on some screens in this
Firmware User Guide
may not appear on your own particular model’s console screen.
These differences are noted throughout the manual.
• IP Setup • Filter Sets • IP Address Serving
• Network Address Translation (NAT) • Stateful Inspection • Date and Time
• Console Configuration • SNMP (Simple Network
Management Protocol)
• Security
• Upgrade Feature Set • Change Device to a Bridge • Logging