Filter
Top Products
WAN and System Configuration 2-41
■ Start Address: Start IP Address of the exposed host range.
■ End Address: End IP Address of the exposed host range
■ Protocol: Select the Protocol of the traffic to be allowed to the host range from the pull-down menu.
Options are Any, TCP, UDP, or TCP/UDP.
■ Start Port: Start port of the range to be allowed to the host range. The acceptable range is from 1 - 65535
■ End Port: Protocol of the traffic to be allowed to the host range. The acceptable range is from 1 - 65535
You can edit or delete exposed address lists by selecting Show/Change Exposed Address List or Delete
Exposed Address List. A list of previously configured exposed addresses appears.
This allows you to select an exposed address list for editing or deletion.
Change Exposed Address Range ("my_xposed_list")
First Exposed Address: 192.168.1.10
Last Exposed Address: +-------------+
+-------------+
Protocol... | TCP and UDP |
| TCP |
Port Start: | UDP |
| ANY |
Port End: +-------------+
CHANGE EXPOSED ADDRESS RANGE CANCEL
Add Exposed Address List
+------Exposed Address Range---------Protocol-------------------+
+---------------------------------------------------------------+
| 192.168.1.10 192.168.1.12 TCP and UDP |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+---------------------------------------------------------------+
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.